Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites
  • Machine PRIOMIX CLP: Super powerful for large construction sites

Render spray machine, screed pump PRIOMIX Pragma CLP

made-in-france%20(1).jpgMachine for traditional coating and screeding carrier :

The machine for large projects and for construction sites. Versatile, it can pump both fluid screeds, mortars, micro-concrete up to 10 mm grain size and also project the traditional monolayer coatings and thanks to its 4-cylinder Kubota engine and hydraulic pump with variable flow.

French made
Manufacturer: AMPM
Brand: Priomix

Quantity

Mixing

malaxage-pragma12s.JPG

Preparation of mortar easily (from2 to 12 bags at the same time).

Mixer capacity up to 12 bags per batch (depending on product density): saving time compared to a conventional machine that can mix a max from 6 to 8 bags, the operator spends less time at the machine.
Water metering with automatic stop on the mixer, water ramp INOX with jets directed on the mixing shaft.

Bar grating on the mixer or protective cover against dust emissions with optimized product descent through the shaker grate.

Optional: suction and dust collection system (patent pending)

Vérin de relevage en position centrale et repris sur le châssis

The opening direction of the mixer grid will delete the entire proceeds of the last blighted, thus limiting losses of material.

• Forward and reverse on the mixer.

• Variable speed

Ability to mix the engine idling

Hydrowash system for an almost automatic tank cleaning

Photo: lifting cylinder in a central position and taken on the chassis.


Pumping

tamis-vibrant-pragma12s.JPG

Large hopper steep reception: capacity of 16 bags, the steep slope allows complete emptying without adhesion of the product on the walls.

The hopper bottom is stainless steel, high aluminum part is coated with a high quality paint promoting the flow of the product.

The hopper safety grid is optimized to cause minimum discomfort to the user and allows the agitation of the product without stop pumping.
The screw shaft at the hopper bottom improves the feeding of the pump and has two coupling flectors
adjustable pump speed from 0 to 300 rev / min, pump pressure up to 30 bar.
Pump casing 60.12 with a theoretical speed of up to 250 liters per minute.
pumping facility of traditional mortars, a vibrating screen is optional.

Catering available in the mixer truck through the vibrating screen for the application of fluid screeds, mortars and micro concretes.


A pressure washer powerful series !

170 bar, 11 liters / min variable flow and pressure from the dashboard to adjust the strength of the jet to the area to be cleaned avoiding splashing and rain gear!

Not only quick cleaning of the machine after work, but also to clean the facades. Flexible 10ml comes with the machine as well as launching two jets (rotating nozzle and additional piping optional).
Positioning in the machine ensures the automatic emptying of the water circuit to avoid freezing in winter conditions.


A simple machine without electronics !

une-machine-sans-electronique-pragma12s.

No board electronical controller in the machine! The safety devices are managed through relays and fuses!


• Hydraulic speed drive.

• Operation diagnosis dash by an LED.

• Pressure gauge of pumping and mixing pressures.

• Scoreboard protected by a lockable cap.

• Use the 4 functions can simultaneously!

• Pumping, HP cleaning, mixing and pumping can be used at any time! Practice in the cleaning phase of the machine!

tableau-de-bord-pragma12s.JPG


The only one machine with an air compressor without belt !

For reliability, the compressor is driven by hydraulics.

More belt slipping or breakage during projection! The pneumatic circuit is equipped with a venting air valve that can significantly extend the life of the compressor by resting during the downtime of the projection.
It is cooled by a broken pulley.


organes-mecaniques-pragma12s.JPGFull accessibility to mechanical parts !

New engine casing, complete access to filter elements to promote the maintenance and reduce response times.

Fuel tank capacity 30 liters directly accessible from the opening of the cover and the battery.

The polyester cover can be removed in minutes for total access to the engine compartment.


moteur-kubota-pragma12s.JPGEngine

• KUBOTA D 1505 Liquid-cooled 4-cylinder. 26 Kw

 

The idling of the diesel engine is automatic stopping the projection for a more economical operation.


Galvanized road chassisroue-jockey-pragma12s.JPG

Galvanized tubular chassis approved UTAC, 1100 Kgs road axle, drawbar T and large wheels (165/80/13) give the machine exceptional driving qualities, Approved to 130 km / h.

• Axle braked series given the weight of 900 kg.

• Fires are protected by the body, very resistant coiled cord allows their connection to the tractor.

• The jack castor wheel allows easy attachment to one man.

• The crutches in the back and in the front stabilize the machine during operation.

PRIOMIX Pragma CLP

Data sheet

Type of product
Machines for coatings
Type of product
Screed pumps
Brand
Priomix
Manufacturer
AMPM
Engine
D1505 4-cylinder
Engine
Liquid cooling
Engine
24 kW to 2500 t/mn
Driving
Variable flow hydraulics
Performance / Debit
rotor stator flow 60.12
Performance / Debit
0 to 250 liters / mn*
Max pressure pumping
25 bars
Backflow
Height 40 meters*
Backflow
Length 100 meters*
Granulometry max
10 mm
Radio control multi-fontion
Non
Compressor
Hydraulic drive without belt
Compressor
400 l / mn
Pressure washer
170 bars
Pressure washer
11 liters/mn
Mixer capacity
260 liters
Mixer capacity
12 bags
Hopper Capacity
280 liters
Hydraulic Tank Capacity
35 liters
Fuel tank Capacity
30 liters
Weight
900 kg
Dimensions
L : 3000 l : 1400 h : 1200
Filling height
0 m 95
Road equipments
Crutches front / rear
Road equipments
Braked axle
Road equipments
Jockey wheel
Road equipments
Approval road 130 km / h
Road equipments
Lights integrated into the rear panel
Standard equipment
Grease + cartridge
Standard equipment
Water supply, water dispenser with additional tap
Standard equipment
Bars mixer grid
Standard equipment
Water metering with automatic stop
Standard equipment
Pressure gauge
Optional equipments
Electric vibrating screen 12 volts CLP
Optional equipments
Anti vibrating dust hood
Optional equipments
Theft of drawbar
Optional equipments
Aspiration and dust collection
Information with asterisk *
* Depends on the pumpability of the product, adjustment and wear of the pump housing; for reference, the distances pumping are not cumulative.

Specific References

New

Download

Download (3.86MB)